| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - |
| 1 | important | fix DECOM_ENR is not clear found in v1.12 | if DECOM_ENR is not cleared, rootfs would be decompress failed cause by decom busy status. | - |
| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - |
| 1 | critical | Fix problem of LPDDR4X MRR error | The judgment logic of LPDDR4X in the MRR function is defective. As a result, the LPDDR4X MRR data may be incorrect. | - |
| 2 | important | Fix error of some LPDDR4 in 528MHz | The code does not consider that the Wr Lvl result of some LPDDR4 may be negative, which may lead to error in the judgment of Wr Lvl result. | 358198 |
| 3 | moderate | Fix timing error of some DDR | The settings of t_xs_x32, t_xs_abort_x32, and t_xs_fast_x32 are incorrect. Some DDR (less than 128M) may fail in other platform. | - |
| 4 | important | Fix some x32 LPDDR3 instability issues | The detection process of LPDDR3 is defective. Part of x32 LPDDR3 is identified as x16, which results in some timing setting errors. | 322844 |
| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - |
