// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2021 Rockchip Electronics Co., Ltd. * */ #include "dt-bindings/usb/pd.h" #include "rk3588-nvr-demo.dtsi" / { ite_pwr_en: ite-pwr-en { compatible = "regulator-fixed"; regulator-name = "ITE-PWR_EN"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; enable-active-high; gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; }; }; &dp0 { /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; status = "okay"; }; &dp0_sound { status = "okay"; }; &dp1 { pinctrl-0 = <&dp1m2_pins &dp1_hdmi_reset>; pinctrl-names = "default"; status = "okay"; }; &dsi1 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; dsi1_out_panel: endpoint { remote-endpoint = <&panel_in_dsi1>; }; }; }; }; &dsi1_in_vp2 { status = "okay"; }; &dsi1_in_vp3 { status = "okay"; }; &i2c6 { status = "okay"; it6161: it6161@6c { status = "okay"; compatible = "ite,it6161"; #sound-dai-cells = <0>; reg = <0x6c>; it6161-addr-hdmi-tx = <0x4C>; it6161-addr-cec = <0x4E>; interrupt-parent = <&gpio0>; interrupts = ; enable-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; panel_in_dsi1: endpoint { remote-endpoint = <&dsi1_out_panel>; }; }; }; }; usbc0: fusb302@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&usbc0_int>; vbus-supply = <&vcc5v0_otg>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_role_sw: endpoint@0 { remote-endpoint = <&dwc3_0_role_switch>; }; }; }; usb_con: connector { compatible = "usb-c-connector"; label = "USB-C"; data-role = "dual"; power-role = "dual"; try-power-role = "sink"; op-sink-microwatt = <1000000>; sink-pdos = ; source-pdos = ; altmodes { #address-cells = <1>; #size-cells = <0>; altmode@0 { reg = <0>; svid = <0xff01>; vdo = <0xffffffff>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_orien_sw: endpoint { remote-endpoint = <&usbdp_phy0_orientation_switch>; }; }; port@1 { reg = <1>; dp_altmode_mux: endpoint { remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; }; }; }; }; }; }; &mipi_dcphy1 { status = "okay"; }; &route_dp0 { status = "disabled"; }; &usbdp_phy0 { status = "okay"; orientation-switch; svid = <0xff01>; sbu1-dc-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; sbu2-dc-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; port { #address-cells = <1>; #size-cells = <0>; usbdp_phy0_orientation_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_orien_sw>; }; usbdp_phy0_dp_altmode_mux: endpoint@1 { reg = <1>; remote-endpoint = <&dp_altmode_mux>; }; }; }; &usbdrd_dwc3_0 { dr_mode = "otg"; usb-role-switch; port { #address-cells = <1>; #size-cells = <0>; dwc3_0_role_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_role_sw>; }; }; }; &spdif_tx2 { status = "okay"; }; &pinctrl { dp { dp1_hdmi_reset: dp-hdmi-reset { rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb-typec { usbc0_int: usbc0-int { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };