// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Rockchip Electronics Co., Ltd. */ /dts-v1/; #include #include #include "rk3566.dtsi" #include "rk3566-evb.dtsi" / { model = "Rockchip RK3566 EVB5 LP4X V10 Board"; compatible = "rockchip,rk3566-evb5-lp4x-v10", "rockchip,rk3566"; vcc3v3_pcie: gpio-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; startup-delay-us = <5000>; vin-supply = <&dc_12v>; }; rk_headset: rk-headset { compatible = "rockchip_headset"; headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; }; vcc3v3_vga: vcc3v3-vga { compatible = "regulator-fixed"; regulator-name = "vcc3v3_vga"; regulator-always-on; regulator-boot-on; gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vcc3v3_sys>; }; }; &audiopwmout_diff { status = "disabled"; }; &combphy1_usq { status = "okay"; }; &combphy2_psq { status = "disabled"; }; &dig_acodec { status = "disabled"; rockchip,pwm-output-mode; pinctrl-names = "default"; pinctrl-0 = <&audiopwm_loutp &audiopwm_loutn &audiopwm_routp &audiopwm_routn >; }; /* * video_phy0 needs to be enabled * when dsi0 is enabled */ &dsi0 { status = "okay"; connect = <&vp1_out_dsi0>; }; &dsi0_in_vp0 { status = "disabled"; }; &dsi0_in_vp1 { status = "okay"; }; &dsi0_panel { power-supply = <&vcc3v3_lcd0_n>; reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&lcd0_rst_gpio>; }; /* * video_phy1 needs to be enabled * when dsi1 is enabled */ &dsi1 { status = "disabled"; }; &dsi1_in_vp0 { status = "disabled"; }; &dsi1_in_vp1 { status = "disabled"; }; &dsi1_panel { power-supply = <&vcc3v3_lcd1_n>; reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&lcd1_rst_gpio>; }; &edp { hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; status = "disabled"; }; &edp_phy { status = "disabled"; }; &edp_in_vp0 { status = "disabled"; }; &edp_in_vp1 { status = "disabled"; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "output"; snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; assigned-clock-rates = <0>, <125000000>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m0_miim &gmac1m0_tx_bus2_level3 &gmac1m0_rx_bus2 &gmac1m0_rgmii_clk_level2 &gmac1m0_rgmii_bus_level3>; tx_delay = <0x41>; rx_delay = <0x2e>; phy-handle = <&rgmii_phy1>; status = "disabled"; }; /* * power-supply should switche to vcc3v3_lcd1_n * when mipi panel is connected to dsi1. */ >1x { power-supply = <&vcc3v3_lcd0_n>; }; &i2c5 { status = "disabled"; }; &i2s3_2ch { status = "disabled"; }; &mdio1 { rgmii_phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; }; &video_phy0 { status = "okay"; }; &video_phy1 { status = "disabled"; }; &pcie2x1 { reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "disabled"; }; &pdm { status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pdmm1_clk1 &pdmm1_sdi1 &pdmm1_sdi2 &pdmm1_sdi3>; }; &pdmics { status = "disabled"; }; &pdm_mic_array { status = "disabled"; }; &route_dsi0 { status = "okay"; }; &sdmmc2 { status = "disabled"; }; &uart1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>; }; &uart3 { status = "disabled"; }; &uart4 { status = "disabled"; }; &uart7 { status = "disabled"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "disabled"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "disabled"; }; &vcc3v3_lcd0_n { gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; enable-active-high; }; &vcc3v3_lcd1_n { gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; enable-active-high; }; &wireless_bluetooth { uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "rts_gpio"; pinctrl-0 = <&uart1m1_rtsn>; pinctrl-1 = <&uart1_gpios>; BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; status = "disabled"; }; &wireless_wlan { pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; status = "disabled"; }; &work_led { status = "disabled"; }; &pinctrl { headphone { hp_det: hp-det { rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; }; }; lcd0 { lcd0_rst_gpio: lcd0-rst-gpio { rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd1 { lcd1_rst_gpio: lcd1-rst-gpio { rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; wireless-bluetooth { uart1_gpios: uart1-gpios { rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; };