You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
RV1126 Release Note
rv1126_tee_ta_v2.11.bin
Date |
File |
Build commit |
Severity |
2023-10-07 |
rv1126_tee_ta_v2.11.bin |
65a719aaa |
important |
New
- Supports SLP_WAKEUP_TO_RESET sleep mode.
rv1126_spl_v1.10.bin
Date |
File |
Build commit |
Severity |
2023-09-28 |
rv1126_spl_v1.10.bin |
e4e124926e |
important |
New
- Print and pass the firmware version number.
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails |
When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. |
- |
rv1126_tee_ta_v2.10.bin
Date |
File |
Build commit |
Severity |
2023-08-29 |
rv1126_tee_ta_v2.10.bin |
b5340fd65 |
important |
New
- Supports read and write security flag interfaces.
- Support check ta encryption key is written.
rv1126_tee_ta_v2.09.bin
Date |
File |
Build commit |
Severity |
2023-05-26 |
rv1126_tee_ta_v2.09.bin |
59f324679 |
important |
New
- Kernel support read vboot key hash and secure boot flag.
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
disable dynamic share memory |
running CA TA applications will fail probability when using dynamic shared memory. |
- |
rv1126_usbplug_v1.24.bin
Date |
File |
Build commit |
Severity |
2023-03-31 |
rv1126_usbplug_v1.24.bin |
0744719244 |
important |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
fix OTP chip id write error |
if chip id is blank, it will be written rv1126. |
- |
rv1126_spl_emmc_tb_v1.13.bin
Date |
File |
Build commit |
Severity |
2022-12-09 |
rv1126_spl_emmc_tb_v1.13.bin |
f3f5db2e27 |
important |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
fix DECOM_ENR is not clear found in v1.12 |
if DECOM_ENR is not cleared, rootfs would be decompress failed cause by decom busy status. |
- |
rv1126_tee_ta_tb_v1.07.bin
Date |
File |
Build commit |
Severity |
2022-12-09 |
rv1126_tee_ta_tb_v1.07.bin |
4eb6cbf6c |
important |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
Solve the problem that OPTEE is stuck during startup when printing is closed |
User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot |
- |
rv1126_ddr_{1056 ... 784}MHz_v1.09.bin
Date |
File |
Build commit |
Severity |
2022-10-25 |
rv1126_ddr_{1056 ... 784}MHz_v1.09.bin |
8fef64cfb9 |
critical |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
critical |
Fix problem of LPDDR4X MRR error |
The judgment logic of LPDDR4X in the MRR function is defective. As a result, the LPDDR4X MRR data may be incorrect. |
- |
2 |
important |
Fix error of some LPDDR4 in 528MHz |
The code does not consider that the Wr Lvl result of some LPDDR4 may be negative, which may lead to error in the judgment of Wr Lvl result. |
358198 |
3 |
moderate |
Fix timing error of some DDR |
The settings of t_xs_x32, t_xs_abort_x32, and t_xs_fast_x32 are incorrect. Some DDR (less than 128M) may fail in other platform. |
- |
4 |
important |
Fix some x32 LPDDR3 instability issues |
The detection process of LPDDR3 is defective. Part of x32 LPDDR3 is identified as x16, which results in some timing setting errors. |
322844 |
rv1126_tee_ta_v2.08.bin
Date |
File |
Build commit |
Severity |
2022-10-24 |
rv1126_tee_ta_v2.08.bin |
317f8b06b |
important |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
Fix error of fiq stack information |
Enter 'bt' command in fiq mode, That will show wrong stack information. |
- |
rv1126_tee_ta_v2.07.bin
Date |
File |
Build commit |
Severity |
2022-09-16 |
rv1126_tee_ta_v2.07.bin |
d84087907 |
important |
Fixed
Index |
Severity |
Update |
Issue description |
Issue source |
1 |
important |
Solve the problem that OPTEE is stuck during startup when printing is closed |
User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot |
- |
rv1126_{miniloader, usbplug}_ftl_v1.23.bin
Date |
File |
Build commit |
Severity |
2022-09-08 |
rv1126_{miniloader, usbplug}_ftl_v1.23.bin |
55a904 |
moderate |
New
- Support SPI Nand MX35UF1GE4AD MX35UF2GE4AD.