You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
806 lines
17 KiB
806 lines
17 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/sensor-dev.h>
|
|
#include "rk3368.dtsi"
|
|
#include "rk3368-android.dtsi"
|
|
|
|
/ {
|
|
es8316-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "rockchip,rk-es8316-codec";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Mic Jack", "MICBIAS1",
|
|
"IN1P", "Mic Jack",
|
|
"Headphone Jack", "HPOL",
|
|
"Headphone Jack", "HPOR";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&es8316>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk818 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm0 0 25000 0>;
|
|
brightness-levels = <
|
|
0 1 2 3 4 5 6 7
|
|
8 9 10 11 12 13 14 15
|
|
16 17 18 19 20 21 22 23
|
|
24 25 26 27 28 29 30 31
|
|
32 33 34 35 36 37 38 39
|
|
40 41 42 43 44 45 46 47
|
|
48 49 50 51 52 53 54 55
|
|
56 57 58 59 60 61 62 63
|
|
64 65 66 67 68 69 70 71
|
|
72 73 74 75 76 77 78 79
|
|
80 81 82 83 84 85 86 87
|
|
88 89 90 91 92 93 94 95
|
|
96 97 98 99 100 101 102 103
|
|
104 105 106 107 108 109 110 111
|
|
112 113 114 115 116 117 118 119
|
|
120 121 122 123 124 125 126 127
|
|
128 129 130 131 132 133 134 135
|
|
136 137 138 139 140 141 142 143
|
|
144 145 146 147 148 149 150 151
|
|
152 153 154 155 156 157 158 159
|
|
160 161 162 163 164 165 166 167
|
|
168 169 170 171 172 173 174 175
|
|
176 177 178 179 180 181 182 183
|
|
184 185 186 187 188 189 190 191
|
|
192 193 194 195 196 197 198 199
|
|
200 201 202 203 204 205 206 207
|
|
208 209 210 211 212 213 214 215
|
|
216 217 218 219 220 221 222 223
|
|
224 225 226 227 228 229 230 231
|
|
232 233 234 235 236 237 238 239
|
|
240 241 242 243 244 245 246 247
|
|
248 249 250 251 252 253 254 255>;
|
|
default-brightness-level = <200>;
|
|
enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
charge-animation {
|
|
compatible = "rockchip,uboot-charge";
|
|
rockchip,uboot-charge-on = <1>;
|
|
rockchip,android-charge-on = <0>;
|
|
rockchip,uboot-low-power-voltage = <3500>;
|
|
rockchip,screen-on-voltage = <3600>;
|
|
status = "okay";
|
|
};
|
|
|
|
rk_key: rockchip-key {
|
|
compatible = "rockchip,key";
|
|
status = "okay";
|
|
|
|
io-channels = <&saradc 1>;
|
|
|
|
vol-up-key {
|
|
linux,code = <115>;
|
|
label = "volume up";
|
|
rockchip,adc_value = <1>;
|
|
};
|
|
|
|
vol-down-key {
|
|
linux,code = <114>;
|
|
label = "volume down";
|
|
rockchip,adc_value = <170>;
|
|
};
|
|
|
|
power-key {
|
|
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <116>;
|
|
label = "power";
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
rockchip,grf = <&grf>;
|
|
/* wifi_chip_type - wifi chip define
|
|
* ap6210, ap6330, ap6335
|
|
* rtl8188eu, rtl8723bs, rtl8723bu
|
|
* esp8089
|
|
*/
|
|
wifi_chip_type = "ap6210";
|
|
sdio_vref = <1800>; //1800mv or 3300mv
|
|
WIFI,host_wake_irq = <&gpio3 6 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&rk818 1>;
|
|
clock-names = "ext_clock";
|
|
uart_rts_gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default","rts_gpio";
|
|
pinctrl-0 = <&uart0_rts>;
|
|
pinctrl-1 = <&uart0_rts_gpio>;
|
|
|
|
//BT,power_gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
|
BT,reset_gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
};
|
|
|
|
vcc_host: vcc-host {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&host_vbus_drv>;
|
|
regulator-name = "vcc_host";
|
|
regulator-always-on;
|
|
};
|
|
|
|
xin32k: xin32k {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "xin32k";
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&syr827>;
|
|
};
|
|
|
|
&gpu {
|
|
logic-supply = <&vdd_logic>;
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
status = "okay";
|
|
rockchip,sleep-mode-config = <
|
|
(0
|
|
| RKPM_SLP_ARMOFF
|
|
| RKPM_SLP_PMU_PLLS_PWRDN
|
|
| RKPM_SLP_PMU_PMUALIVE_32K
|
|
| RKPM_SLP_SFT_PLLS_DEEP
|
|
| RKPM_SLP_PMU_DIS_OSC
|
|
| RKPM_SLP_SFT_PD_NBSCUS
|
|
)
|
|
>;
|
|
rockchip,wakeup-config = <
|
|
(0
|
|
| RKPM_GPIO_WKUP_EN
|
|
| RKPM_USB_WKUP_EN
|
|
| RKPM_CLUSTER_L_WKUP_EN
|
|
)
|
|
>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
no-sdio;
|
|
no-sd;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&nandc0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdmmc {
|
|
clock-frequency = <37500000>;
|
|
clock-freq-min-max = <400000 37500000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
disable-wp;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdio0 {
|
|
clock-frequency = <50000000>;
|
|
clock-freq-min-max = <200000 50000000>;
|
|
no-sd;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
syr827: syr827@40 {
|
|
compatible = "silergy,syr827";
|
|
status = "okay";
|
|
reg = <0x40>;
|
|
regulator-compatible = "fan53555-reg";
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-0 = <&vsel_gpio>;
|
|
vsel-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-state = <3>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
rk818: pmic@1c {
|
|
compatible = "rockchip,rk818";
|
|
status = "okay";
|
|
reg = <0x1c>;
|
|
clock-output-names = "rk818-clkout1", "wifibt_32kin";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
vcc7-supply = <&vcc_sys>;
|
|
vcc8-supply = <&vcc_sys>;
|
|
vcc9-supply = <&vcc_io>;
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_io: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_io";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcca_codec: LDO_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcca_codec";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_tp: LDO_REG2 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc_tp";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-name = "vdd_10";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc18_lcd: LDO_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc18_lcd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vccio_pmu: LDO_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vccio_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd10_lcd: LDO_REG6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-name = "vdd10_lcd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc_18: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_18";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vccio_wl: LDO_REG8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vccio_wl";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_sd: SWITCH_REG {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_sd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
boost_otg: DCDC_BOOST {
|
|
regulator-name = "boost_otg";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <5000000>;
|
|
};
|
|
};
|
|
|
|
otg_switch: OTG_SWITCH {
|
|
regulator-name = "otg_switch";
|
|
};
|
|
|
|
hdmi_switch: HDMI_SWITCH {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "hdmi_switch";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
battery {
|
|
compatible = "rk818-battery";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dc_irq_gpio>;
|
|
ocv_table = <
|
|
3400 3650 3693 3707 3731 3749 3760
|
|
3770 3782 3796 3812 3829 3852 3882
|
|
3915 3951 3981 4047 4086 4132 4182>;
|
|
design_capacity = <8650>;
|
|
design_qmax = <8800>;
|
|
bat_res = <85>;
|
|
max_input_current = <2000>;
|
|
max_chrg_current = <1800>;
|
|
max_chrg_voltage = <4200>;
|
|
sleep_enter_current = <600>;
|
|
sleep_exit_current = <600>;
|
|
power_off_thresd = <3400>;
|
|
zero_algorithm_vol = <3850>;
|
|
fb_temperature = <115>;
|
|
sample_res = <20>;
|
|
max_soc_offset = <60>;
|
|
energy_mode = <0>;
|
|
monitor_sec = <5>;
|
|
virtual_power = <0>;
|
|
power_dc2otg = <1>;
|
|
support_usb_adp = <1>;
|
|
support_dc_adp = <1>;
|
|
dc_det_gpio = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
es8316: es8316@10 {
|
|
status = "okay";
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es8316";
|
|
reg = <0x10>;
|
|
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
|
clock-names = "mclk";
|
|
spk-con-gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
|
hp-det-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s_8ch_mclk>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
gt9xx: gt9xx@14 {
|
|
compatible = "goodix,gt9xx";
|
|
reg = <0x14>;
|
|
touch-gpio = <&gpio0 12 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
|
max-x = <1920>;
|
|
max-y = <1200>;
|
|
tp-size = <89>;
|
|
status = "okay";
|
|
tp-supply = <&vcc_tp>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
mpu6500_acc: mpu_acc@68 {
|
|
compatible = "mpu6500_acc";
|
|
reg = <0x68>;
|
|
irq-gpio = <&gpio3 14 IRQ_TYPE_LEVEL_LOW>;
|
|
irq_enable = <0>;
|
|
poll_delay_ms = <30>;
|
|
type = <SENSOR_TYPE_ACCEL>;
|
|
layout = <7>;
|
|
};
|
|
|
|
mpu6500_gyro: mpu_gyro@68 {
|
|
compatible = "mpu6500_gyro";
|
|
reg = <0x68>;
|
|
irq_enable = <0>;
|
|
poll_delay_ms = <30>;
|
|
type = <SENSOR_TYPE_GYROSCOPE>;
|
|
layout = <7>;
|
|
};
|
|
|
|
mpu6500@68 {
|
|
status = "disabled";
|
|
compatible = "invensense,mpu6500";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mpu6500_irq_gpio>;
|
|
reg = <0x68>;
|
|
irq-gpio = <&gpio3 14 IRQ_TYPE_EDGE_RISING>;
|
|
mpu-int_config = <0x10>;
|
|
mpu-level_shifter = <0>;
|
|
mpu-orientation = <1 0 0 0 1 0 0 0 1>;
|
|
orientation-x= <1>;
|
|
orientation-y= <0>;
|
|
orientation-z= <1>;
|
|
support-hw-poweroff = <1>;
|
|
mpu-debug = <1>;
|
|
};
|
|
};
|
|
|
|
&i2s_8ch {
|
|
status = "okay";
|
|
rockchip,i2s-broken-burst-len;
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <2>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
dvp-supply = <&vcc_18>;
|
|
audio-supply = <&vcc_io>;
|
|
gpio30-supply = <&vcc_io>;
|
|
gpio1830-supply = <&vcc_io>;
|
|
sdcard-supply = <&vccio_sd>;
|
|
wifi-supply = <&vccio_wl>;
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
|
|
pmu-supply = <&vccio_pmu>;
|
|
vop-supply = <&vccio_pmu>;
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy {
|
|
status = "okay";
|
|
|
|
u2phy_host: host-port {
|
|
phy-supply = <&vcc_host>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi {
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "simple-panel-dsi";
|
|
reg = <0>;
|
|
backlight = <&backlight>;
|
|
enable-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
|
prepare-delay-ms = <120>;
|
|
enable-delay-ms = <200>;
|
|
|
|
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
|
|
dsi,format = <MIPI_DSI_FMT_RGB888>;
|
|
dsi,lanes = <4>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
|
|
timing0: timing0 {
|
|
clock-frequency = <145000000>;
|
|
hactive = <1920>;
|
|
vactive = <1200>;
|
|
hback-porch = <16>;
|
|
hfront-porch = <24>;
|
|
vback-porch = <10>;
|
|
vfront-porch = <16>;
|
|
hsync-len = <10>;
|
|
vsync-len = <3>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <0>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
panel_in_dsi: endpoint {
|
|
remote-endpoint = <&dsi_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi_out_panel: endpoint {
|
|
remote-endpoint = <&panel_in_dsi>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&route_dsi {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
tsadc-supply = <&syr827>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
vsel_gpio: vsel-gpio {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
mpu6500 {
|
|
mpu6500_irq_gpio: mpu6500-irq-gpio {
|
|
rockchip,pins = <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
dc_det {
|
|
dc_irq_gpio: dc-irq-gpio {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb2 {
|
|
host_vbus_drv: host-vbus-drv {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart0_rts_gpio: uart0-rts-gpio {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|