You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
501 lines
9.4 KiB
501 lines
9.4 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include "rk3566.dtsi"
|
|
#include "rk3566-evb.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RK3566 EVB3 DDR3 V10 Board";
|
|
compatible = "rockchip,rk3566-evb3-DDR3-v10", "rockchip,rk3566";
|
|
|
|
rk_headset: rk-headset {
|
|
compatible = "rockchip_headset";
|
|
headset_gpio = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det>;
|
|
};
|
|
|
|
vcc3v3_vga: vcc3v3-vga {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_vga";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
vcc_camera: vcc-camera-regulator {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&camera_pwr>;
|
|
regulator-name = "vcc_camera";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&combphy1_usq {
|
|
status = "okay";
|
|
};
|
|
|
|
&csi2_dphy_hw {
|
|
status = "okay";
|
|
};
|
|
|
|
&csi2_dphy0 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi_in_ucam0: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&ov5695_out>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
mipi_in_ucam1: endpoint@2 {
|
|
reg = <2>;
|
|
remote-endpoint = <&gc8034_out>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
csidphy_out: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&isp0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* video_phy0 needs to be enabled
|
|
* when dsi0 is enabled
|
|
*/
|
|
&dsi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0_in_vp1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_panel {
|
|
power-supply = <&vcc3v3_lcd0_n>;
|
|
reset-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd0_rst_gpio>;
|
|
};
|
|
|
|
/*
|
|
* video_phy1 needs to be enabled
|
|
* when dsi1 is enabled
|
|
*/
|
|
&dsi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_panel {
|
|
power-supply = <&vcc3v3_lcd1_n>;
|
|
reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd1_rst_gpio>;
|
|
};
|
|
|
|
&edp {
|
|
hpd-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&gmac1 {
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1m0_miim
|
|
&gmac1m0_tx_bus2_level3
|
|
&gmac1m0_rx_bus2
|
|
&gmac1m0_rgmii_clk_level2
|
|
&gmac1m0_rgmii_bus_level3>;
|
|
|
|
tx_delay = <0x41>;
|
|
rx_delay = <0x2e>;
|
|
|
|
phy-handle = <&rgmii_phy1>;
|
|
status = "okay";
|
|
};
|
|
|
|
>1x {
|
|
power-supply = <&vcc3v3_lcd0_n>;
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c2m1_xfer>;
|
|
|
|
gc2145: gc2145@3c {
|
|
status = "okay";
|
|
compatible = "galaxycore,gc2145";
|
|
reg = <0x3c>;
|
|
clocks = <&cru CLK_CIF_OUT>;
|
|
clock-names = "xvclk";
|
|
power-domains = <&power RK3568_PD_VI>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cif_clk &cif_dvp_clk &cif_dvp_bus16>;
|
|
|
|
/*avdd-supply = <&vcc2v8_dvp>;*/
|
|
/*dovdd-supply = <&vcc1v8_dvp>;*/
|
|
/*dvdd-supply = <&vcc1v8_dvp>;*/
|
|
|
|
power-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
/*reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;*/
|
|
pwdn-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
rockchip,camera-module-index = <1>;
|
|
rockchip,camera-module-facing = "front";
|
|
rockchip,camera-module-name = "CameraKing";
|
|
rockchip,camera-module-lens-name = "Largan";
|
|
port {
|
|
gc2145_out: endpoint {
|
|
remote-endpoint = <&dvp_in_bcam>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ov5695: ov5695@36 {
|
|
status = "okay";
|
|
compatible = "ovti,ov5695";
|
|
reg = <0x36>;
|
|
clocks = <&cru CLK_CAM0_OUT>;
|
|
clock-names = "xvclk";
|
|
power-domains = <&power RK3568_PD_VI>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_clkout0>;
|
|
reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
/*power-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;*/
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "TongJu";
|
|
rockchip,camera-module-lens-name = "CHT842-MD";
|
|
port {
|
|
ov5695_out: endpoint {
|
|
remote-endpoint = <&mipi_in_ucam0>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gc8034: gc8034@37 {
|
|
compatible = "galaxycore,gc8034";
|
|
status = "okay";
|
|
reg = <0x37>;
|
|
clocks = <&cru CLK_CAM0_OUT>;
|
|
clock-names = "xvclk";
|
|
power-domains = <&power RK3568_PD_VI>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_clkout0>;
|
|
reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
|
|
pwdn-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "RK-CMK-8M-2-v1";
|
|
rockchip,camera-module-lens-name = "CK8401";
|
|
port {
|
|
gc8034_out: endpoint {
|
|
remote-endpoint = <&mipi_in_ucam1>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2s3_2ch {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
rockchip,clk-trcm = <1>;
|
|
pinctrl-0 = <&i2s3m1_sclk
|
|
&i2s3m1_lrck
|
|
&i2s3m1_sdi
|
|
&i2s3m1_sdo>;
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
&video_phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&video_phy1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pdm {
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pdmm1_clk1
|
|
&pdmm1_sdi1
|
|
&pdmm1_sdi2
|
|
&pdmm1_sdi3>;
|
|
};
|
|
|
|
&pdmics {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pdm_mic_array {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pinctrl {
|
|
cam {
|
|
camera_pwr: camera-pwr {
|
|
rockchip,pins =
|
|
/* camera power en */
|
|
<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
lcd0 {
|
|
lcd0_rst_gpio: lcd-rst-gpio {
|
|
rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd1 {
|
|
lcd1_rst_gpio: lcd1-rst-gpio {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart1_gpios: uart1-gpios {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkcif {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkcif_dvp {
|
|
status = "okay";
|
|
|
|
port {
|
|
/* Parallel bus endpoint */
|
|
dvp_in_bcam: endpoint {
|
|
remote-endpoint = <&gc2145_out>;
|
|
bus-width = <8>;
|
|
vsync-active = <0>;
|
|
hsync-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkisp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp_vir0 {
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
isp0_in: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&csidphy_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rk809_codec {
|
|
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
|
clocks = <&cru I2S3_MCLKOUT>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&cru I2S3_MCLKOUT>, <&cru I2S3_MCLK_IOE>;
|
|
assigned-clock-rates = <12288000>;
|
|
assigned-clock-parents = <&cru I2S3_MCLKOUT_TX>, <&cru I2S3_MCLKOUT>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s3m1_mclk>;
|
|
hp-volume = <20>;
|
|
spk-volume = <3>;
|
|
mic-in-differential;
|
|
status = "okay";
|
|
};
|
|
|
|
&rk809_sound {
|
|
status = "okay";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "rockchip,rk809-codec";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s3_2ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rk809_codec 0>;
|
|
};
|
|
};
|
|
|
|
&route_dsi0 {
|
|
status = "okay";
|
|
connect = <&vp1_out_dsi0>;
|
|
};
|
|
|
|
&sata1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio_pwrseq {
|
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&sdmmc1 {
|
|
max-frequency = <150000000>;
|
|
no-sd;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&spdif_8ch {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
|
};
|
|
|
|
&vcc3v3_lcd0_n {
|
|
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
&wireless_bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "ext_clock";
|
|
//wifi-bt-power-toggle;
|
|
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart1m0_rtsn>;
|
|
pinctrl-1 = <&uart1_gpios>;
|
|
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wireless_wlan {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
|
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
WIFI,poweren_gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&work_led {
|
|
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
};
|