rk35xx-android12/hardware/rockchip/libgralloc/midgard/configure

#!/usr/bin/env bash

# Copyright (C) 2019-2020 Arm Limited.
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This script selects the build configuration to use for Gralloc.
# The Arm Reference Gralloc supports multiple versions of Android and Gralloc APIs.
# This script must be used before the build stage to select what to build, consistently with the target Android system.
#
# The Arm Reference Gralloc supports the following combinations:
# - Gralloc 4 APIs on Android 11
# This uses Blueprint as a build system.

# - Gralloc 3 APIs on Android 10
# This uses Makefiles as a build system.
# The privatebuffer interface is enabled by default, but can be disabled (not recommended.)
#
# The script determines automatically what to do from the environment, which requires a previous "lunch".
#
# When not in a "lunched" shell, the Android version can be set to 'n' by specifying:
# ANDROID_n=y
# The Android version affects whether the private buffer interface build is enabled or not.
# It will be enabled on Android version 10 unless overriden with the PRIVATE_BUFFER_INTERFACE option.
#
# The Android version also affects the Gralloc version which is then used to decide
# whether the Blueprint build files are enabled.
# Defaults are:
#   Android 9 : Gralloc 2, use makefiles.
#   Android 10: Gralloc 3, use makefiles.
#   Android 11: Gralloc 4, use Blueprint.
#
# To override the default Gralloc version to n use:
# GRALLOC_n=y
# Note that this does not mean that that version of Gralloc will be built, it only controls
# whether makefiles or Blueprint files are enabled.
#
# The script does not check that the combination of options specified is valid.

set -e

PLATFORM_VERSION=0
GRALLOC_VERSION=0

# In a lunched shell auto detect the Android version.
if [ ! -z $ANDROID_BUILD_TOP ]; then
    PLATFORM_VERSION=$(${ANDROID_BUILD_TOP}/build/soong/soong_ui.bash --dumpvar-mode PLATFORM_VERSION 2>/dev/null)
    # Adjust for early access versions that use a capital letter eg. Q -> 10
    if [[ $PLATFORM_VERSION == [A-Z] ]]; then
        PLATFORM_VERSION=$(printf "%d" "'$PLATFORM_VERSION")
        PLATFORM_VERSION=$(($PLATFORM_VERSION - 71))
    fi
fi

SELECTED_PLATFORM=0
for arg in "$@"; do
    case $arg in
    ANDROID_9=y)
        SELECTED_PLATFORM=9
        ;;
    ANDROID_10=y)
        SELECTED_PLATFORM=10
        ;;
    ANDROID_11=y)
        SELECTED_PLATFORM=11
        ;;
    PRIVATEBUFFER_INTERFACE=y)
        PRIVATE_BUFFER=1
        ;;
    PRIVATEBUFFER_INTERFACE=n)
        PRIVATE_BUFFER=0
        ;;
    GRALLOC_2=y)
        GRALLOC_VERSION=2
        ;;
    GRALLOC_3=y)
        GRALLOC_VERSION=3
        ;;
    GRALLOC_4=y)
        GRALLOC_VERSION=4
        ;;
    *)
        echo "$arg ignored"
        ;;
    esac
done

if [ $PLATFORM_VERSION != 0 ] && [ $SELECTED_PLATFORM != 0 ] && [ $PLATFORM_VERSION != $SELECTED_PLATFORM ]; then
   echo "ANDROID_${SELECTED_PLATFORM} ignored. Using detected Android version of ${PLATFORM_VERSION}"
elif [ $SELECTED_PLATFORM != 0 ]; then
    PLATFORM_VERSION=$SELECTED_PLATFORM
fi

if [ $PLATFORM_VERSION = 0 ] && [ $GRALLOC_VERSION = 0 ] && [ -z $PRIVATE_BUFFER ]; then
    echo "Error: no Android version detected or specified. It is recommended to run from a lunched shell."
    exit 1
fi

if [ -z $PRIVATE_BUFFER ] && [ $PLATFORM_VERSION = 10 ]; then
    PRIVATE_BUFFER=1
fi

if [ -z $PRIVATE_BUFFER ]; then
    PRIVATE_BUFFER=0
fi

if [ $GRALLOC_VERSION = 0 ]; then
    case $PLATFORM_VERSION in
    9)
        GRALLOC_VERSION=2
        ;;
    10)
        GRALLOC_VERSION=3
        ;;
    11)
        GRALLOC_VERSION=4
        ;;
    esac
fi

if [ $PRIVATE_BUFFER = 1 ]; then
    echo "Private buffer interface build enabled."
fi

# command pushd `dirname $0` > /dev/null
command pushd $(pwd) > /dev/null

# Clean all build files
find . \( -name "Android.bp" ! -wholename "*src/Android.bp" \) -delete
if [ -f Android.mk ]; then
    mv Android.mk Android.mk.disabled
fi

if [ $PRIVATE_BUFFER = 1 ]; then
    cp interfaces/Android.bp.disabled interfaces/Android.bp
    for path in `find interfaces/graphics -name Android.bp.disabled`; do
        dir=`dirname $path`
        cp $dir/Android.bp.disabled $dir/Android.bp
    done
    cp interfaces/libs/drmutils/Android.bp.disabled interfaces/libs/drmutils/Android.bp
fi

if [ $GRALLOC_VERSION = 0 ]; then
    echo "Warning: no Gralloc version selected. No build files enabled."
    exit
else
    echo "Enabling build files for Gralloc version ${GRALLOC_VERSION}"
fi

if [ $GRALLOC_VERSION = 2 ] || [ $GRALLOC_VERSION = 3 ]; then
    cp Android.mk.disabled Android.mk
fi

# Stable AIDL and DRM utils interfaces
AIDL_FILES="interfaces/aidl/Android.bp.disabled
            interfaces/libs/drmutils/Android.bp.disabled"

# Blueprint files for all modules common to all Gralloc versions
COMMON_FILES="Android.bp.disabled
              src/core/Android.bp.disabled
              src/capabilities/Android.bp.disabled
              src/allocator/Android.bp.disabled
              src/hidl_common/Android.bp.disabled"

# Blueprint files for tests
if [ -d tests ]; then
    TEST_FILES=`find tests -name Android.bp.disabled`
else
    TEST_FILES=
fi

if [ $GRALLOC_VERSION = 4 ]; then
    GRALLOC4_FILES="${AIDL_FILES}
                    ${COMMON_FILES}
                    ${TEST_FILES}
                    service/4.x/Android.bp.disabled
                    src/4.x/Android.bp.disabled"

    for FILE in $GRALLOC4_FILES; do
        cp "${FILE}" "${FILE%.disabled}"
    done
fi

command popd > /dev/null