[u-boot] nanopi_m5: add missing U3PHY_BASE for usb3 init

Signed-off-by: hmz007 <hmz007@gmail.com>

u-boot/board/rockchip/nanopi_m5/board.c

@@ -29,6 +29,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_USB_DWC3
 #define CRU_BASE		0x27200000
 #define CRU_SOFTRST_CON47	0x0abc
+#define U3PHY_BASE		0x2b010000
 
 static struct dwc3_device dwc3_device_data = {
 	.maximum_speed = USB_SPEED_SUPER,
@@ -70,14 +71,14 @@ int board_usb_init(int index, enum usb_init_type init)
 
 	if (rkusb_switch_usb3_enabled()) {
 		dwc3_device_data.maximum_speed = USB_SPEED_SUPER;
-		ret = rockchip_u3phy_uboot_init();
+		ret = rockchip_u3phy_uboot_init(U3PHY_BASE);
 		if (ret) {
 			rkusb_force_to_usb2(true);
 			dwc3_device_data.maximum_speed = USB_SPEED_HIGH;
 		}
 	}
 #else
-	ret = rockchip_u3phy_uboot_init();
+	ret = rockchip_u3phy_uboot_init(U3PHY_BASE);
 	if (ret) {
 		rkusb_force_to_usb2(true);
 		dwc3_device_data.maximum_speed = USB_SPEED_HIGH;