// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
 * (http://www.friendlyarm.com)
 *
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 */

/dts-v1/;

#include "rk3566.dtsi"
#include "rk3568-nanopi5-common.dtsi"

/ {
	model = "FriendlyElec NanoPi R3S";
	compatible = "friendlyelec,nanopi-r3s", "rockchip,rk3568";

	aliases {
		ethernet0 = &gmac1;
		ethernet1 = &r8169;
	};

	gpio_keys: gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&key1_pin>;

		button@1 {
			debounce-interval = <50>;
			gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
			label = "K1";
			linux,code = <BTN_1>;
			wakeup-source;
		};
	};

	gpio_leds: gpio-leds {
		compatible = "gpio-leds";

		sys_led: led-0 {
			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
			label = "sys_led";
			linux,default-trigger = "heartbeat";
			pinctrl-names = "default";
			pinctrl-0 = <&sys_led_pin>;
		};

		wan_led: led-1 {
			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
			label = "wan_led";
			pinctrl-names = "default";
			pinctrl-0 = <&wan_led_pin>;
		};

		lan_led: led-2 {
			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
			label = "lan_led";
			pinctrl-names = "default";
			pinctrl-0 = <&lan_led_pin>;
		};
	};

	pwm_backlight: pwm-backlight {
		status = "disabled";
		compatible = "pwm-backlight";
	};
};

&combphy1_usq {
	status = "okay";
};

&combphy2_psq {
	status = "okay";
};

&dfi {
	status = "okay";
};

&dmc {
	center-supply = <&vdd_logic>;
	status = "okay";
};

&gmac1 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 15ms, 50ms for rtl8211f */
	snps,reset-delays-us = <0 15000 50000>;

	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m0_miim
		     &gmac1m0_tx_bus2_level3
		     &gmac1m0_rx_bus2
		     &gmac1m0_rgmii_clk_level2
		     &gmac1m0_rgmii_bus_level3>;

	tx_delay = <0x3c>;
	rx_delay = <0x2f>;

	phy-handle = <&rgmii_phy1>;
	status = "okay";
};

&mach {
	hwrev = <1>;
	model = "NanoPi R3S";
	machine = "NANOPI-R3";
};

&mdio1 {
	rgmii_phy1: phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x1>;
		interrupt-parent = <&gpio4>;
		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&gmac_int>;
		realtek,ledsel = <0xae00>;
	};
};

&i2c1 {
	status = "okay";

	hym8563: hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
		wakeup-source;
	};
};

dsi1_i2c: &i2c2 {
	clock-frequency = <200000>;
	status = "disabled";
};

&i2c5 {
	status = "disabled";
};

&pcie2x1 {
	num-viewport = <4>;
	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
	status = "okay";

	pcie@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;

		r8169: pcie@1,0 {
			reg = <0x000000 0 0 0 0>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			realtek,ledsel = <0x870>;
		};
	};
};

&pinctrl {
	gpio-key {
		key1_pin: key1-pin {
			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	gpio-leds {
		sys_led_pin: sys-led-pin {
			rockchip,pins =
				<0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		wan_led_pin: wan-led-pin {
			rockchip,pins =
				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		lan_led_pin: lan-led-pin {
			rockchip,pins =
				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	gmac {
		gmac_int: gmac-int {
			rockchip,pins =
				<4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	lcd {
		/omit-if-no-ref/
		lcd_rst1_gpio: lcd-rst1-gpio {
			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		/omit-if-no-ref/
		touch_dsi1_gpio: touch-dsi1-gpio {
			rockchip,pins =
				<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
				<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	rtc {
		rtc_int: rtc-int {
			rockchip,pins =
				<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&pmu_io_domains {
	status = "okay";
	pmuio2-supply = <&vcc3v3_pmu>;
	vccio2-supply = <&vcc_1v8>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcc_3v3>;
	vccio5-supply = <&vcc_1v8>;
	vccio6-supply = <&vcc_3v3>;
	vccio7-supply = <&vcc_3v3>;
};

&pwm0 {
	status = "disabled";
	/* connected with sys_led */
};

dsi1_pwm: &pwm4 {
	status = "disabled";
};

&sata1 {
	status = "disabled";
};

&sata2 {
	status = "disabled";
};

&sfc {
	status = "disabled";
};

&u2phy0_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&u2phy0_otg {
	/delete-property/ phy-supply;
	status = "okay";
};

/delete-node/ &vcc5v0_otg;

&u2phy1_host {
	status = "disabled";
};

&u2phy1_otg {
	status = "disabled";
};

&usb2phy0 {
	status = "okay";
};

&usb2phy1 {
	status = "disabled";
};

&usb_host0_ehci {
	status = "disabled";
};

&usb_host0_ohci {
	status = "disabled";
};

&usb_host1_ehci {
	status = "disabled";
};

&usb_host1_ohci {
	status = "disabled";
};

&usbdrd_dwc3 {
	dr_mode = "otg";
	extcon = <&usb2phy0>;
	status = "okay";
};

&usbdrd30 {
	status = "okay";
};

&usbhost_dwc3 {
	status = "okay";
};

&usbhost30 {
	status = "okay";
};

&vp0 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER0>;
};

&vp1 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_ESMART0 | 1 << ROCKCHIP_VOP2_SMART0)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART0>;
};

&vp2 {
	rockchip,plane-mask = <(
				1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1 |
				1 << ROCKCHIP_VOP2_SMART1)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART1>;
	status = "disabled";
};

&route_hdmi {
	status = "okay";
};

&hdmi_in_vp0 {
	status = "okay";
};

&hdmi {
	status = "okay";
};